Category Archives: Tutorial

How to create a Password Protected Folder in Windows 7

This tutorial will guide you through the steps required to create a locked folder in Windows 7 – without installing any additional 3rd party software.

9/27/15 Update: although the screenshots will be different, the method outlined in this tutorial to create a password protected folder does work in Windows 8.

While the steps below will guide you in creating a hidden and password protected folder, this method is not 100% secure. It will deter the average computer user enough, but an advanced user will be able to access the contents of this folder. If you want to create a truly secure and encrypted place to store files and folders that absolutely nobody will ever be able to access, see the tutorial How to Securely Store Files in Windows (which includes installing software, but it’s completely free).

    1. Create a new folder and name it whatever you would like.

    1. Open the folder, right-click on a blank area in it, then select New -> Text Document from the pop-up menu.

    1. Open the text file you just created by double-clicking it and copy/paste in the following text:

      cls
      @ECHO OFF
      title Folder Private
      if EXIST “Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}” goto UNLOCK
      if NOT EXIST Private goto MDLOCKER
      :CONFIRM
      echo Are you sure you want to lock the folder(Y/N)
      set/p “cho=>”
      if %cho%==Y goto LOCK
      if %cho%==y goto LOCK
      if %cho%==n goto END
      if %cho%==N goto END
      echo Invalid choice.
      goto CONFIRM
      :LOCK
      ren Private “Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}”
      attrib +h +s “Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}”
      echo Folder locked
      goto End
      :UNLOCK
      echo Enter password to unlock folder
      set/p “pass=>”
      if NOT %pass%== PASSWORD_GOES_HERE goto FAIL
      attrib -h -s “Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}”
      ren “Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}” Private
      echo Folder Unlocked successfully
      goto End
      :FAIL
      echo Invalid password
      goto end
      :MDLOCKER
      md Private
      echo Private created successfully
      goto End
      :End

    2. In the above code, replace the key PASSWORD_GOES_HERE with the password you want to use to unlock the folder. For example if you want the password to be 123456, the line should look like:

      if NOT %pass%== 123456 goto FAIL

    3. Save your new file in the .bat format with the complete file name being locker.bat. To do this, make sure to change the Save as type: to All Files (*.*).


click to enlarge

    1. In the folder you created back in Step #1, double click the locker.bat file and there will now be a new folder named Private where you can put anything you want.

    1. Upon exiting, double click the locker.bat file again. It will prompt you to answer whether you want to lock your folder or not. Press Y and the private folder will disappear.


click to enlarge

    1. In order to retrieve the Private folder, all you have to do is double click the locker.bat file and enter the password which you set in Step #4 and the folder will appear again for you to access.


click to enlarge

  1. That’s it!

ASUS Zenfone 4 Root Tutorial

You are reading the tutorial of asus zenfone 4.
You can follow the tutorial to root your phone by yourself.

As Asus’s first attempt at a mainstream budget phone, Zenfone 4 has a colorful design, a decent internal storage and a feature-packed camera app. If you have purchased it and want to get it rooted, you can follow the following steps.

 

Step 1. Backup all important data and files in your device to prevent data loss.

 

Step 2. Download USB driver for your device and install it in PC.

 

Step 3. Open USB debugging mode and power off your device. Then hold Volume Down, Volume Up and Power button simultaneously to enter DROIDBOOT mode.

 

Step 4. Connect the device to PC and you’ll see “Ready for Download” on the screen of your phone.

 

Step 5. Download Root_Zenfone 4_T001.rar and extract it to a folder in PC.

 

Step 6. Open the folder, press “Shift” button and right click at empty space, you’ll see “Open Command Window here” option. Click it to open a command prompt.

 

Step 7. Type “fastboot erase cache” and hit “Enter” key. Then type “fastboot flash update root_zenfone4_v4.2.0.zip” and press “Enter” key again.

 

Step 8. After the process finished, check if you can find SuperSU app in your device. If yes, it proves that you are rooted successfully!

 

Also you can try Super Root Android which provides simplest and safest rooting ways. It can root many Android devices by only one click! Unrooting function is also provided its the interface.

 

zenfone.png

Tutorial Root Lenovo S960 ( Vibe X)

Hari ni saya nak buat tutorial tentang bagaimana untuk root Lenovo S960 anda. Seperti mana post2 saya yang lepas2, cara rooting kali ini juga sangat mudah. Jom kita mulakan!

s960

vroot

Apa yang perlukan ialah:

1. Vroot. klik sini untuk download.
2. USB cable
3. Vibe X.
4. PC/ Laptop

Cara-caranya:

1. Download Vroot dan install ke PC/Lapy anda.

2. Turn on USB debuugging pada hp anda. Rujuk sini tentang cara untuk Turn on USB Debugging.

3. Run Vroot. Connect device.

4. Sambungkan USB cable ke PC/Lappy. Tunggu sehingga Vroot selesai mengenalpasti hp anda. Setelah hp dikenal pasti, button Root akan muncul. Tekan root.

5. Hp anda akan restart dengan sendiri. Jangan risau kerana ini adalah proses biasa. Setelah hp anda selesai restart, satu icon superuser Vroot akan muncul di skrin.

6. Tahniah! Hp anda telah pun di root. Untuk mendapatkan kepastian root, anda bolehlah men download aplikasi root checker di Playstore.

root checker on s960

Selamat berjaya!

How to Exit Factory Mode for Samsung Galaxy Devices

FactoryModeIf your device display a annoying transparency black background which contains some info about your device (PDA, Phone, CSC, H/W, Camera, …) in yellow text … and lock screen is not working, mean that your device is in factory mode.

“Factory Mode” is enabled if the EFS partition is corrupted because of installing custom ROMs, bad Mods or downgrading your current system version or after you succeeded in fixing the EFS partition.

Requirements :

Steps :

  • Open “ES File Explorer” and press on the top left icon
  • Go to Tools and turn on “Root Explorer”es root file explorer
  • Go to Local > / Device > efs > FactoryApp and open factorymode as text in “ES Note Editor”
  • Change it from OFF to ON and save it
  • Open keystr as text in “ES Note Editor”, change it from OFF to ON and save it
  • Reboot

Or :

  • Install “Terminal Emulator
  • Type : su
  • Type : rm /efs/FactoryApp/keystr
    rm /efs/FactoryApp/factorymode
    echo -n ON >> /efs/FactoryApp/keystr
    echo -n ON >> /efs/FactoryApp/factorymode
    chown 1000.1000 /efs/FactoryApp/keystr
    chown 1000.1000 /efs/FactoryApp/factorymode
    chmod 0744 /efs/FactoryApp/keystr
    chmod 0744 /efs/FactoryApp/factorymode
    reboot

You can also remove the annoying message without root, but it won’t fix it

  • Go to Settings > Application manager > All
  • Search Factory Test and “Clear data”, “Clear cache”

How to Fix “E:Failed to Mount /EFS” for SAMSUNG

Mount-EFS-issueSometimes when you are trying to repair the IMEI number of your device, you follow bad instructions or by fault you didn’t follow it well, as result of that your device will not boot, still frozen on Samsung logo loop and If you have tried to boot into recovery mode, it will display

E:failed to mount /efs (Invalid argument)# Manual Mode #
— Appling Multi-CSC…
Applied the CSC-code : Unknow
Succefuly applied multi-CSC.

Wipe data/factory reset, wipe cache partition, install custom ROM and reflash official firmware will not fix it at all.

How to fix E:Failed to Mount /EFS :

  • Download and flash official firmware for your phone
  • Flash CWM recovery and root your device using recovery method.
  • Install ADB on your computer.
  • Boot your device into recovery mode
  • Connect your device to PC via USB cable
  • In recovery mode Choose “mount and storage > mount /system”
  • Open ADB command window and type :
    adb shell
    su
    mke2fs /dev/block/mmcblk0p3
    mount -w -t ext4 /dev/block/mmcblk0p3
    reboot

By following the above cmd, it will create a generic EFS files on your device
Now normally your device will reboot and it should pass Samsung logo.
Your device might display a screen with a yellow text (FactoryMode), follow this to fix it.

Cara Install Custom Rom

CARA INSTALL ROM :
  1. Download Rom.zip lalu pindahkan ke sdcard
  2. Matikan HH agan kemudian masuk ke CWM dengan cara menekan Tombol Power + Volume Up
  3. Di CWM lakukan langkah berikut : Wipe Data/Factory Reset, Wipe Cache Partition, dan Wipe Dalvik Cache (ada di menu advance), serta format/data,format/system, format/chache ada di menu Mount n Storage
  4. Pilih Install Zip From SdCard kemudian pilih file Rom.zip dan install
  5. Tunggu proses flashing rom hingga selesai kemudian pilih GO BACK lalu pilih Reboot System Now
  6. Tunggu proses booting sampe selesai (agak lama waktu booting pertama kali)
  7. Finish


Cara Install Update :

  1. Download Update nya
  2. Masuk CWM
  3. Install Update nya tanpa melakukan wipe atau format
  4. Finish

STOCK ROM Lenovo A316i & Update S042

A316i_Standard_05Saya cuma mau share Stock Rom Lenovo A316i asli (bukan Globe) yang sempat saya backup dan sempat update ke S040 sebelum install Cusrom, dan berhasil saya repack supaya bisa install via cwm

mungkin aja ada yang minat

CARA INSTALLNYA SAMA SEPERTI INSTALL CUSROM CUSROM LAIN

Untuk Stock Rom S040 ODEX

Versi ODEX Minimalis (UNROOT)
Download 333 MB

Versi ODEX Full (UNROOT)
Download 476 MB

Fix phone storage dan update S042  :
Download 12 MB

karena saya masih belajar, jadi Fix wifi NVRAM errornya masih manual, install via CWM setelah install rom
Fix NVRAM: Download

BUAT YANG SUKA OPREK, STOCK ROM DEODEX yang sudah versi S042 (ROOTED)
Download 302 MB

Tutorial Instal Di  SINI

Ini masih berupa stock rom, belum di obrak abrik, silakan modif sendiri, belajarlah, jangan nunggu orang lain ngeshare, soalnya ngeshare juga pake duit…OK bray..

Thanks For :
Aji Wahyu Sasmita
Van De Arma
Om Jen
Eka Saputra Tan
Ant Setiawan
Kabe Webe

Security Flaw on P1 DV 230 WiMAX Modem allows WiFi Stealing

p1wimax_dv230P1’s DV 230 WiMAX Modem is one of the first WiMAX with WiFi modem that’s easy to use thanks to its simple plug and play approach. The only technical bit for the user is to enter the predefined WEP password which is uniquely customised for each USB WiFi Module.

It looks all good and dandy but there’s just one small problem. We found out that the “unique” WEP password isn’t that unique after all.

 

If you’ve seen or used one of these, you will notice that they will give a randomised Wireless Access Point name or SSID such as 07D24A and followed by a long WEP password such as 7D24A1FFB0. Sure, you think that this is all safe but recently it was brought to our attention that there’s a simple flaw with the way they created these unique WEP passwords.

How to access your neighbour’s default unconfigured P1 DV 230 Modem?

After reading up some postings online and comparison with our own, we’ve discovered a similar pattern in all P1 DV 230 modems. Here’s how you get the WEP Password from the SSID:

  1. Get the SSID. e.g. 02B92C
  2. Remove the first character. (02B92C -> 2B92C)
  3. Add 1FFB0 (Zero not the letter O) (WEP Password: 2B92C1FFB0)

Easy, isn’t it? By default, most P1 customers would just switch on the modem and surf away without any need of changing the password. Therefore, it is highly likely that anyone can scan their WiFi and search for a SSID that contains 6 random numbers which is most probably a P1 WiFi modem. With the technique above, anyone can access a default P1 DV 230 modem without much restriction.

We’re surprised that P1 didn’t actually randomised the WEP Passwords and to add more insult to the injury, P1 also didn’t also put much effort in educating its customers on the need of changing their WEP password for security reasons.

Disclaimer: We do not condone unauthorised use and stealing of other people’s WiFi connection. We’re not responsible if you’re caught stealing WiFi connection and you may be subject to legal action if found guilty of doing so.

How do you protect your P1 DV 230 Modem?

If you’re a P1 DV 230 Modem user, you can change your WiFi WEP Password to prevent your neighbours from potentially sucking up your limited monthly bandwidth with the steps below.

  1. From your browser which could be either Internet Explorer or Firefox, enter http://10.1.1.254
  2. Enter the following:
    Username: admin
    Password: admin123
  3. Click on Networking at the top right
  4. On the left, click on WiFi
  5. Click on NEXT at the bottom to see your WiFi security settings.
  6. Select Manual Define and you will be able to make changes to your SSID and WEP Password.
  7. Apply and reboot your modem by clicking on the power icon on the top right.
  8. Your laptop/computer will be disconnected and you may need to search for the P1 DV 230 modem with the new settings.

If you feel your P1 connection is faster or use less bandwidth after changing your password, it looks like you’ve been suckered by someone close by.

We hope that P1 will notify its customers on this and hopefully they won’t repeat such security flaw in their future products.

DV 230 Manual Download